HK1416-2RS Drawn Cup Needle Roller Bearing 14x20x16mm
£6.09
Drawn cup needle roller bearing with open ends. Runs directly on a hardened, ground shaft and is pressed into the housing, so no shoulders or circlips are needed. For a 14 mm shaft (Fw), 20 mm outside diameter and 16 mm wide. Rubber seals both sides.
Not sure it's the right one, or can't find what you need?
Send us the part number, sizes or a photo of your old bearing and we'll check it for you. You can also measure it yourself in a couple of minutes.
Save up to £0.91 each with a trade account
Buying 10 or more? That's up to £9.10 off. Trade customers get 5% to 15% off every order, applied automatically.
Open a trade account- Description
- Additional information
Description
Drawn cup needle roller bearing with open ends. Runs directly on a hardened, ground shaft and is pressed into the housing, so no shoulders or circlips are needed. For a 14 mm shaft (Fw), 20 mm outside diameter and 16 mm wide. Rubber seals both sides.
- Bore (mm): 14
- Outside Diameter (mm): 20
- Width (mm): 16
- Bearing Type: Needle roller
- Seal Type: Rubber seals both sides
Stock code: HK1416-2RS
Additional information
| Bore (mm) | 14 |
|---|---|
| Outside Diameter (mm) | 20 |
| Width (mm) | 16 |
| Bearing Type | Needle roller |
| Seal Type | Rubber seals both sides |
